| Model | Â CI3040-4 |
| Camera |
| Image Sensor | Â 1/3″Â Progressive Scan Sensor |
| Minimum  Illumination |  0.01 Lux@F1.2 AGC ON, 0 Lux with IR |
| Shutter speed | Â NTSC:1/3 s to 1/10,000 s |
| Lens | Â 4 mm |
| Lens Mount | Â M12 |
| Day & Night | Â IR cut filter with auto switch |
| Digital Noise Reduction | Â 3D DNR |
| Wide Dynamic Range | Â 120dB |
| Compression Standard |
| Video Compression | Â H.264 / MJPEG |
| H.264 compression profile | Â Main profile |
| Bit Rate | Â 32 Kbps ~ 8 Mbps |
| Dual stream | Â Yes |
| Image |
| Max. Resolution | Â 2688 x 1520 |
| Frame Rate |  20fps @ 2688×1520, 30fps @ 1920 x 1080 |
| Image Settings | Â Rotate Mode, Saturation, Brightness, Contrast, Sharpness adjustable by client software or web browser |
| BLC | Â Support, zone configurable |
| ROI Codec | Â Support |
| Network |
| Network Storage | Â NAS (Support NFS,SMB/CIFS), ANR |
| Alarm Trigger | Â Motion detection, Tampering alarm, Network disconnect, IP address confict, Storage full , Storage error |
| Protocols | Â TCP/IP, ICMP, HTTP, HTTPS, FTP, DHCP, DNS, DDNS, RTP, RTSP, RTCP, PPPoE, NTP, UPnP, SMTP, SNMP, IGMP, IPv6, Bonjour |
| General | Â One-key reset, Flash-prevention, dual stream, heartbeat, mirror, password protection, privacy mask, watermark, IP address filtering, Anonymous access |
| System compatibility | Â ONVIF, PSIA, CGI, ISAPI |
| Interface |
| Network Interface | Â 1 RJ45 10M / 100M ethernet port |
| Reset | Â Yest |
| General |
| Working Temperature / Humidity | Â -22FÂ ~Â 140F / -30CÂ ~Â 60C
Humidity 95% or less (non-condensing) |
| Power Supply | Â 12V DC, PoE (802.3af) |
| Power Consumption | Â Max. 5W |
| Weather Proof Ratings | Â IP66 |
| IR Range | Â Up to 100ft |
| Dimensions | Â 2.4″ x 3.0″ x 5.5″ |
| Weight | Â 1.1 lb |
| Apps |
| iOS, Android Apps: | Â Guarding Expert |