| Model | CI3040-4 |
| Camera |
| Image Sensor | 1/3″ Progressive Scan Sensor |
| Minimum Illumination | 0.01 Lux@F1.2 AGC ON, 0 Lux with IR |
| Shutter speed | NTSC:1/3 s to 1/10,000 s |
| Lens | 4 mm |
| Lens Mount | M12 |
| Day & Night | IR cut filter with auto switch |
| Digital Noise Reduction | 3D DNR |
| Wide Dynamic Range | 120dB |
| Compression Standard |
| Video Compression | H.264 / MJPEG |
| H.264 compression profile | Main profile |
| Bit Rate | 32 Kbps ~ 8 Mbps |
| Dual stream | Yes |
| Image |
| Max. Resolution | 2688 x 1520 |
| Frame Rate | 20fps @ 2688×1520, 30fps @ 1920 x 1080 |
| Image Settings | Rotate Mode, Saturation, Brightness, Contrast, Sharpness adjustable by client software or web browser |
| BLC | Support, zone configurable |
| ROI Codec | Support |
| Network |
| Network Storage | NAS (Support NFS,SMB/CIFS), ANR |
| Alarm Trigger | Motion detection, Tampering alarm, Network disconnect, IP address confict, Storage full , Storage error |
| Protocols | TCP/IP, ICMP, HTTP, HTTPS, FTP, DHCP, DNS, DDNS, RTP, RTSP, RTCP, PPPoE, NTP, UPnP, SMTP, SNMP, IGMP, IPv6, Bonjour |
| General | One-key reset, Flash-prevention, dual stream, heartbeat, mirror, password protection, privacy mask, watermark, IP address filtering, Anonymous access |
| System compatibility | ONVIF, PSIA, CGI, ISAPI |
| Interface |
| Network Interface | 1 RJ45 10M / 100M ethernet port |
| Reset | Yest |
| General |
| Working Temperature / Humidity | -22F ~ 140F / -30C ~ 60C
Humidity 95% or less (non-condensing) |
| Power Supply | 12V DC, PoE (802.3af) |
| Power Consumption | Max. 5W |
| Weather Proof Ratings | IP66 |
| IR Range | Up to 100ft |
| Dimensions | 2.4″ x 3.0″ x 5.5″ |
| Weight | 1.1 lb |
| Apps |
| iOS, Android Apps: | Guarding Expert |
